BuzziResoFuser este un modul acustic care în principal absoarbe sunetul din spectrul vorbirii , fiind un sistem proiectat să îmbunătățească audibilitatea dicuțiilor dintr-un open-space.
Combinat cu BuzziTile3D, un perete de bun gust poate fi creat cu ușurință. BuzziResoFuser operează pe baza sistemului de sfert de lungime de undă. Aceasta înseamnă că BuzziResoFuser trebuie să aibă abilitatea să "respire", deci trebuie instalat "alternativ". În acest fel aperturile rămân vizibile tot timpul. Creând un model de culori alternative, capetele rămân deschise. BuzziResoFuser se prinde de perete cu ajutorul unui cârlig.
The operating frequency of the BuzziResoFuser is adjustable. By changing the position of the partitions in the grooves at the back of the BuzziResoFuser, it is possible to absorb frequencies efficiently. This can be done by placing three partitions at the same level or at differing heights. To determine which frequencies have to be absorbed in the room, a reverberation time measurement has to be taken. The frequencies that remain in the room for longer periods have to be absorbed. The frequencies can be read on the back of the BuzziResoFuser. These frequencies have a specific bandwidth, which means that a frequency can always be chosen that is close to the problem frequency measured in the room.
Fitting two BuzziResoFusers together creates a longer cavity and even lower tones can be absorbed. The important thing here is that the apertures of the BuzziResoFusers are open.
